User Manual
Table Of Contents
- 1 About this document
- 2 Commissioning
- 2.1 Default connection
- 2.2 Initial login
- 2.3 Setup wizard
- 2.4 Discover and assign devices
- 2.5 Subscribing to the time master
- 2.6 Time synchronization of the time master
- 2.7 Registering as a foreign device
- 2.8 Touch panel settings
- 2.9 Operating and monitoring features
- 3 Data point integration
- 4 Graphic features
- 4.1 Plant view Tools
- 4.2 Kiosk graphics
- 4.3 Engineering notations
- 5 Graphics Builder
- 5.1 Overview
- 5.2 Pane tools
- 5.3 Graphics libraries
- 6 Graphics engineering
- 6.1 Using supersample graphics
- 6.2 Optimizing graphics for PXM touch panels and standard devices
- 6.3 Thumbnails
- 6.4 Dashboards
- 7 Advanced functionality
- 8 Tips and tricks
- 8.1 Updates required after a time zone change
- 8.2 APPLY BATCH TAGS
- 8.3 Graphic components within models cannot be modified
- 8.4 A graphic with relative binding that includes data points from different branches of the hierarchy cannot be created at the Root level
- 8.5 Relative hyperlinks cannot be added to a graphic at the Root level
- 8.6 Relative hyperlinks in a graphic are broken if the graphic is engineered offline and then imported to another device
- 8.7 Automatic logout from Desigo Control Point causes Graphics Builder to temporarily stop working
- 8.8 Detection of network interruptions
- 8.9 Cancelling a kiosk log out sequence
- 8.10 Special characters do not display in graphic file names
- 8.11 The color of a graphical component may display incorrectly if the component was copied
- Index
Commissioning
Operating and monitoring features
2
22 | 195
A6V11604297_en--_g
Setting
Description
Weekly
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
–
Monthly
Week 1 (Days 1-7)
Week 2 (Days 8-14)
Week 3 (Days 15-21)
Week 4 (Days 22-28)
Week 5 (Days 29-31)
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Time
Displayed in the format selected by the currently logged in user. The default setting is 22:00 or 10:00 PM.
● Field 1: Hours
● Field 2: Minutes
Table 7: Configure alarm history dialog box.
Alarm routing
Alarms is selected in the core function pane.
1. Select > > Alarm routing.
2. Use the following table to make selections in the Alarm routing dialog box.
3. To save your selections, click Apply.
Setting
Description
Max. number of resend attempts
The maximum number of times the application attempts to send an alarm notification email if the
alarm requires an acknowledgement and it has not yet been acknowledged.
If the object is no longer in alarm, an alarm notification email is not resent even if the alarm
requires an acknowledgement, but it has not yet been acknowledged.
Valid entries are numbers greater than or equal to 0. The default is 3.
Retry interval (minutes)
The number of minutes the application waits before resending an email for an unacknowledged
alarm.
Valid entries are numbers greater than or equal to 1. The default is 15.
Table 8: Configure alarm routing dialog box.
2.9.7 Configuring alarm notifications
This procedure configures alarm routing so that recipients only receive the notifications that apply to them. For
example, a selected list of recipients only receives emails for alarms that occur on weekends or during a specific
timeframe.
Prerequisites
● Email recipients are configured.
Configuring email recipients [➙ 18]
● Data points from the devices being monitored for alarms are integrated to the Desigo Control Point device.
Data point integration workflow
Alarms is selected in the core function pane.
1. Select > > Configure alarm routing > .
2. Use the Table
Configure alarm routing dialog box
to make selections in the first dialog box.
3. Click Next.