User Manual
Table Of Contents
- 1 About this document
- 2 Commissioning
- 2.1 Default connection
- 2.2 Initial login
- 2.3 Setup wizard
- 2.4 Discover and assign devices
- 2.5 Subscribing to the time master
- 2.6 Time synchronization of the time master
- 2.7 Registering as a foreign device
- 2.8 Touch panel settings
- 2.9 Operating and monitoring features
- 3 Data point integration
- 4 Graphic features
- 4.1 Plant view Tools
- 4.2 Kiosk graphics
- 4.3 Engineering notations
- 5 Graphics Builder
- 5.1 Overview
- 5.2 Pane tools
- 5.3 Graphics libraries
- 6 Graphics engineering
- 6.1 Using supersample graphics
- 6.2 Optimizing graphics for PXM touch panels and standard devices
- 6.3 Thumbnails
- 6.4 Dashboards
- 7 Advanced functionality
- 8 Tips and tricks
- 8.1 Updates required after a time zone change
- 8.2 APPLY BATCH TAGS
- 8.3 Graphic components within models cannot be modified
- 8.4 A graphic with relative binding that includes data points from different branches of the hierarchy cannot be created at the Root level
- 8.5 Relative hyperlinks cannot be added to a graphic at the Root level
- 8.6 Relative hyperlinks in a graphic are broken if the graphic is engineered offline and then imported to another device
- 8.7 Automatic logout from Desigo Control Point causes Graphics Builder to temporarily stop working
- 8.8 Detection of network interruptions
- 8.9 Cancelling a kiosk log out sequence
- 8.10 Special characters do not display in graphic file names
- 8.11 The color of a graphical component may display incorrectly if the component was copied
- Index
Advanced functionality
Modifying the binding option for multiple points
7
178 | 195
A6V11604297_en--_g
7 Advanced functionality
The procedures in this section assume you have the following knowledge:
● Programming
● Javascript
● BACnet
7.1 Modifying the binding option for multiple points
Use this procedure to modify the binding option for multiple points. For example, when you’re using a
supersample graphic to create a graphic that uses Relative by navName binding.
The graphic contains the required components and smart labels for your system.
1. Open the graphic for editing in Graphics Builder.
2. Open the VIRTUAL POINTS pane, right-click anywhere on the list of points and select RELATIVIZE.
The Select Virtual Points dialog box displays.
3. In the Top Equip section, select a location in the building hierarchy where the graphic will be used.
The tool uses the Top Equip as the root when describing the relative location of the point within the
hierarchy.
4. Select one or more points in the Points to relativize section.
5. Select a radio button for the type of binding and click APPLY.