User Manual
Table Of Contents
- 1 About this document
- 2 Commissioning
- 2.1 Default connection
- 2.2 Initial login
- 2.3 Setup wizard
- 2.4 Discover and assign devices
- 2.5 Subscribing to the time master
- 2.6 Time synchronization of the time master
- 2.7 Registering as a foreign device
- 2.8 Touch panel settings
- 2.9 Operating and monitoring features
- 3 Data point integration
- 4 Graphic features
- 4.1 Plant view Tools
- 4.2 Kiosk graphics
- 4.3 Engineering notations
- 5 Graphics Builder
- 5.1 Overview
- 5.2 Pane tools
- 5.3 Graphics libraries
- 6 Graphics engineering
- 6.1 Using supersample graphics
- 6.2 Optimizing graphics for PXM touch panels and standard devices
- 6.3 Thumbnails
- 6.4 Dashboards
- 7 Advanced functionality
- 8 Tips and tricks
- 8.1 Updates required after a time zone change
- 8.2 APPLY BATCH TAGS
- 8.3 Graphic components within models cannot be modified
- 8.4 A graphic with relative binding that includes data points from different branches of the hierarchy cannot be created at the Root level
- 8.5 Relative hyperlinks cannot be added to a graphic at the Root level
- 8.6 Relative hyperlinks in a graphic are broken if the graphic is engineered offline and then imported to another device
- 8.7 Automatic logout from Desigo Control Point causes Graphics Builder to temporarily stop working
- 8.8 Detection of network interruptions
- 8.9 Cancelling a kiosk log out sequence
- 8.10 Special characters do not display in graphic file names
- 8.11 The color of a graphical component may display incorrectly if the component was copied
- Index
Graphics engineering
Dashboards
6
A6V11604297_en--_g
157 | 195
Modifying the Energy and Water resource consumption graphics
This procedure modifies the Ractive component that compares the building’s resource consumption to
common household devices.
This procedure uses the PROPERTIES and LAYERS panes
1. Open the Sample dashboard public graphic for editing.
2. Click to hide the Weather layer and to display the Energy or Water layer.
3. Select the Ractive component.
4. In the BASIC PROPERTIES, expand RACTIVE EDITOR and click OPEN EDITOR.
The RACTIVE EDITOR dialog box opens with the TEMPLATE tab displayed.
5. Select the MODEL tab to display the configurable properties.
6. Edit the properties as desired. For more information, see the figure
Elements of the Ractive components
that display resource consumption
at the beginning of this topic.
7. When you’re done editing, click to return the Weather layer to the default view.
8. Click and SAVE to save the graphic.
The icons and comparison descriptions have been updated.
Adding a new tab to the Public dashboard
Complete the following procedures to add a new tab to the Public dashboard:
● Adding a new layer
● Adding a button to the navigation bar
Adding a new layer
This procedure uses the PROPERTIES, COMPONENTS and LAYERS panes.