User Manual
Table Of Contents
- 1 About this document
- 2 Commissioning
- 2.1 Default connection
- 2.2 Initial login
- 2.3 Setup wizard
- 2.4 Discover and assign devices
- 2.5 Subscribing to the time master
- 2.6 Time synchronization of the time master
- 2.7 Registering as a foreign device
- 2.8 Touch panel settings
- 2.9 Operating and monitoring features
- 3 Data point integration
- 4 Graphic features
- 4.1 Plant view Tools
- 4.2 Kiosk graphics
- 4.3 Engineering notations
- 5 Graphics Builder
- 5.1 Overview
- 5.2 Pane tools
- 5.3 Graphics libraries
- 6 Graphics engineering
- 6.1 Using supersample graphics
- 6.2 Optimizing graphics for PXM touch panels and standard devices
- 6.3 Thumbnails
- 6.4 Dashboards
- 7 Advanced functionality
- 8 Tips and tricks
- 8.1 Updates required after a time zone change
- 8.2 APPLY BATCH TAGS
- 8.3 Graphic components within models cannot be modified
- 8.4 A graphic with relative binding that includes data points from different branches of the hierarchy cannot be created at the Root level
- 8.5 Relative hyperlinks cannot be added to a graphic at the Root level
- 8.6 Relative hyperlinks in a graphic are broken if the graphic is engineered offline and then imported to another device
- 8.7 Automatic logout from Desigo Control Point causes Graphics Builder to temporarily stop working
- 8.8 Detection of network interruptions
- 8.9 Cancelling a kiosk log out sequence
- 8.10 Special characters do not display in graphic file names
- 8.11 The color of a graphical component may display incorrectly if the component was copied
- Index
Graphics engineering
Dashboards
6
A6V11604297_en--_g
155 | 195
For more information on adding a trend definition, see the
Trends tools
section of the
Desigo Control Point
Operation Manual
(A6V11211557).
BT Download Center
b. Adding a trended data point to the Energy and Water layers
1. In the LAYERS pane, click to display the layer to edit. For example, hide the Weather layer and
display the Energy layer.
Displaying the Energy and Water layers for editing [➙ 153]
2. In the EQUIPMENTS pane, navigate to the trended data point that is the source for the graphic.
3. Drag-and-drop the trended data point onto the graphic.
4. When you’re done editing, click to return the Weather layer to the default view.
5. Click and SAVE to save the graphic.
The “common household devices” now display in the dashboard.
For additional details, see the Adding information from a trended data point [➙ 163] section.
Overview of the Energy and Water resource consumption graphics
The Energy and Water layers of the Public dashboard display a comparison of the building resource
consumption to common household devices. The comparisons were created with a Ractive component. For
more information on Ractive, see https://ractive.js.org/.
● The default configuration of the Energy layer is as follows:
– The number of icons displayed in color represents the average daily consumption as a percentage of the
maximum daily consumption over the last four weeks.
– The icon is a red oven.
– One electric oven uses 72 kWh over the course of the day.
● The default configuration of the Water layer is as follows:
– The number of icons displayed in color represents the average daily consumption as a percentage of the
maximum daily consumption over the last four weeks.
– The icon is a royal blue washing machine.
– Each cycle uses 70 liters of water.
The following figure outlines the elements of the Ractive components that display the resource consumption.