User Manual
Table Of Contents
- 1 About this document
- 2 Commissioning
- 2.1 Default connection
- 2.2 Initial login
- 2.3 Setup wizard
- 2.4 Discover and assign devices
- 2.5 Subscribing to the time master
- 2.6 Time synchronization of the time master
- 2.7 Registering as a foreign device
- 2.8 Touch panel settings
- 2.9 Operating and monitoring features
- 3 Data point integration
- 4 Graphic features
- 4.1 Plant view Tools
- 4.2 Kiosk graphics
- 4.3 Engineering notations
- 5 Graphics Builder
- 5.1 Overview
- 5.2 Pane tools
- 5.3 Graphics libraries
- 6 Graphics engineering
- 6.1 Using supersample graphics
- 6.2 Optimizing graphics for PXM touch panels and standard devices
- 6.3 Thumbnails
- 6.4 Dashboards
- 7 Advanced functionality
- 8 Tips and tricks
- 8.1 Updates required after a time zone change
- 8.2 APPLY BATCH TAGS
- 8.3 Graphic components within models cannot be modified
- 8.4 A graphic with relative binding that includes data points from different branches of the hierarchy cannot be created at the Root level
- 8.5 Relative hyperlinks cannot be added to a graphic at the Root level
- 8.6 Relative hyperlinks in a graphic are broken if the graphic is engineered offline and then imported to another device
- 8.7 Automatic logout from Desigo Control Point causes Graphics Builder to temporarily stop working
- 8.8 Detection of network interruptions
- 8.9 Cancelling a kiosk log out sequence
- 8.10 Special characters do not display in graphic file names
- 8.11 The color of a graphical component may display incorrectly if the component was copied
- Index
Graphics engineering
Using supersample graphics
6
144 | 195
A6V11604297_en--_g
Customizing the graphic
1. Delete the components and smart labels that do not apply to your system.
2.
(Optional)
Do the following to add graphic components:
– Drag-and-drop graphic components from the COMPONENTS pane onto the work area.
Graphics components [➙ 141]
– Drag-and-drop the appropriate data point from the EQUIPMENTS pane onto each new graphic
component.
3.
(Optional)
Drag-and-drop data point(s) from the EQUIPMENTS pane onto the work area to add smart
labels.
The graphic contains the required components and smart labels for your system. The graphic currently uses
Absolute by Point id binding.
Optimizing the graphic
This procedure removes virtual points that were only used for objects that have been deleted.
1. Click in the panels menu and select the VIRTUAL POINTS pane.
2. Right-click on the list of virtual points and select CLEAN VIRTUAL POINTS.
3. Click APPLY to remove the unused virtual points.