User Manual
Table Of Contents
- 1 About this document
- 2 Commissioning
- 2.1 Default connection
- 2.2 Initial login
- 2.3 Setup wizard
- 2.4 Discover and assign devices
- 2.5 Subscribing to the time master
- 2.6 Time synchronization of the time master
- 2.7 Registering as a foreign device
- 2.8 Touch panel settings
- 2.9 Operating and monitoring features
- 3 Data point integration
- 4 Graphic features
- 4.1 Plant view Tools
- 4.2 Kiosk graphics
- 4.3 Engineering notations
- 5 Graphics Builder
- 5.1 Overview
- 5.2 Pane tools
- 5.3 Graphics libraries
- 6 Graphics engineering
- 6.1 Using supersample graphics
- 6.2 Optimizing graphics for PXM touch panels and standard devices
- 6.3 Thumbnails
- 6.4 Dashboards
- 7 Advanced functionality
- 8 Tips and tricks
- 8.1 Updates required after a time zone change
- 8.2 APPLY BATCH TAGS
- 8.3 Graphic components within models cannot be modified
- 8.4 A graphic with relative binding that includes data points from different branches of the hierarchy cannot be created at the Root level
- 8.5 Relative hyperlinks cannot be added to a graphic at the Root level
- 8.6 Relative hyperlinks in a graphic are broken if the graphic is engineered offline and then imported to another device
- 8.7 Automatic logout from Desigo Control Point causes Graphics Builder to temporarily stop working
- 8.8 Detection of network interruptions
- 8.9 Cancelling a kiosk log out sequence
- 8.10 Special characters do not display in graphic file names
- 8.11 The color of a graphical component may display incorrectly if the component was copied
- Index
Graphics Builder
Graphics libraries
5
A6V11604297_en--_g
139 | 195
5.3 Graphics libraries
The Graphics Builder program on your Desigo Control Point device contains the following graphics libraries:
● Supersample graphics [➙ 139]
● Graphics models
● Graphics components [➙ 141]
Note
Graphics models cannot be used with BACnet/IP systems. The pre-built components in this library rely on tags
that are applied to data points in Siemens applications. Therefore, detailed information for graphics models is
not provided in this manual.
Updating the graphics library
ABT Site must be used to update the graphics libraries. Updating the graphics libraries only adds new resources
or updates existing library resources. The update procedure does not affect any new graphics you created or
any graphics created by using SAVE AS GRAPHIC .
For more information, see
Updating the graphics library
in the ABT Site online help.
5.3.1 Supersample graphics
● Supersample graphics are designed for use with the most common applications. Each graphic contains a
super-set of components that are most commonly used for the application. For example:
– The graphic Sample-AHU-ERC-HC-TP provides a layout for a
rotary energy recovery system
with object
labels that display the present value and current status of
heating and cooling
, and
temperature and
pressure
control objects.
– The graphic Sample-RSeg-HVAC-FNC provides a layout for a
room segment
with object labels that
display the present values, setpoints and status for a
fan coil HVAC
system.
● Supersample graphics are recommended as a starting point for creating new graphics.
● All graphics in the supersample graphics library use relative binding.
Fig. 38: Example of a supersample AHU graphic.