User Manual
Table Of Contents
- 1 About this document
- 2 Commissioning
- 2.1 Default connection
- 2.2 Initial login
- 2.3 Setup wizard
- 2.4 Discover and assign devices
- 2.5 Subscribing to the time master
- 2.6 Time synchronization of the time master
- 2.7 Registering as a foreign device
- 2.8 Touch panel settings
- 2.9 Operating and monitoring features
- 3 Data point integration
- 4 Graphic features
- 4.1 Plant view Tools
- 4.2 Kiosk graphics
- 4.3 Engineering notations
- 5 Graphics Builder
- 5.1 Overview
- 5.2 Pane tools
- 5.3 Graphics libraries
- 6 Graphics engineering
- 6.1 Using supersample graphics
- 6.2 Optimizing graphics for PXM touch panels and standard devices
- 6.3 Thumbnails
- 6.4 Dashboards
- 7 Advanced functionality
- 8 Tips and tricks
- 8.1 Updates required after a time zone change
- 8.2 APPLY BATCH TAGS
- 8.3 Graphic components within models cannot be modified
- 8.4 A graphic with relative binding that includes data points from different branches of the hierarchy cannot be created at the Root level
- 8.5 Relative hyperlinks cannot be added to a graphic at the Root level
- 8.6 Relative hyperlinks in a graphic are broken if the graphic is engineered offline and then imported to another device
- 8.7 Automatic logout from Desigo Control Point causes Graphics Builder to temporarily stop working
- 8.8 Detection of network interruptions
- 8.9 Cancelling a kiosk log out sequence
- 8.10 Special characters do not display in graphic file names
- 8.11 The color of a graphical component may display incorrectly if the component was copied
- Index
Graphics Builder
Pane tools
5
128 | 195
A6V11604297_en--_g
Property
Value
①
Short Name
Name displayed with the gauge. If shortName is if blank, navName of the virtual point is
displayed.
②
Background Color
Color of the gauge.
③
Number Color
Color of Min Value and Max Value.
④
Needle Color
Color of the needle.
⑤
Accent Color
Color of the tic marks inside the gauge.
⑥
Text Color
Color of the navName/Short Name and curVal.
⑦
Min Value
Lowest value displayed on the gauge.
Default: minVal of the virtual point if one exists. Otherwise, the default is 0.
⑧
Max Value
Highest value displayed on the gauge.
Default: maxVal of the virtual point if one exists. Otherwise, the default is 100.
Show Background
Select to make the background opaque and display a frame around the gauge.
Table 56: Half-circle Gauge 6 dialog box.
Half-circle Gauge 7
Fig. 29: Half-circle Gauge 7 example in default colors.
Property
Value
①
Short Name
Name displayed with the gauge. If shortName is if blank, navName of the virtual point is
displayed.
②
Dot Color
Color for the dots. Default: #ba2835
③
Number Color
Color of Min Value and Max Value.
④
Gradient Color 1
Color of the left side gradient. Default: #fbb040
⑤
Gradient Color 2
Color of the left side gradient. Default: #be1e2d
⑥
Needle Color
Color for the needle. Default: #000