User Manual

Overview
Commissioning
4
14 | 41 A6V11170804_en--_l
4.3 Commissioning
No tool is required to commission the devices. Commissioning is performed directly on the touch panel or using
an HTML5 browser. The devices are operated using standard operating views. Graphics can be created or
edited online using the integrated graphics editor.
The workflows for commissioning and service are the same as for other Desigo devices.
For further information, see:
● Desigo Touch Panel clients commissioning A6V11604303.
4.4 Engineering
No engineering is required to prepare standard operating views.
The offline engineering workflow is fully integrated in ABT Site:
● Building hierarchy
● Device topology
● Create graphics
Graphics engineering in the runtime system via HTML 5.0 web browser.
Graphic library with a large number of templates and symbols.
User interfaces for technical operators and end users are created using the same engineering solution.
For further information, see:
● Desigo Control Point user's guide A6V11211557
● Desigo Control Point engineering (A6V11211560)