User Manual

Graphics Builder
Pane tools
5
A6V11604297_en--_e
89 | 196
AM|GAUGE
An AM|GAUGE displays the current value (curVal) of a virtual point in a gauge format. This component is
typically used in combination with a PROGRAM and a GROUP.
Configuring an AM|GAUGE
1. Drag-and-drop from COMPONENTS > COMPONENTS onto the work area.
2. Drag-and-drop a numeric point from EQUIPMENTS onto the work area to create a smart label for
the gauge.
3. In the VIRTUAL POINTS pane, locate the virtual point associated with the numeric point that was
used to create the smart label.
4. Drag-and-drop the virtual point onto the gauge to bind it to the component.