User Manual

Graphics Builder
Pane tools
5
72 | 196
A6V11604297_en--_e
BORDER
Adds a border to the selected component.
● Enter a point value in the WIDTH field and select a line TYPE from the
drop-down list.
● Select to change all borders at once.
● Select , or to change individual sections of the border.
● Click the COLOR field to open the palette. Select a color and click the
COLOR field again to save your selection.
● Use the RADIUS field to change the appearance of the corners of the
selected component.
ROTATION
Use the slider or select an option from the drop-down menu to rotate the
selected component.
DROP SHADOW
Adds a drop shadow to the selected component.
● Enter a point value in the HORIZONTAL and VERTICAL fields and
select a shadow TYPE from the drop-down list.
● HORIZONTAL and VERTICAL
Determine if the position of the shadow. For example, a shadow can
display to the right or left and above or below the selected component.
● BLUR
Changes the edges of the shadow.
● SPREAD
Changes the size of the shadow.
● Click the COLOR field to open the palette. Select a color and click the
COLOR field again to save your selection.
● Form field
Specifies an HTML form that the component belongs to. Using this field
is an advanced task.
● Text field
If the selected component is a Label , the label text displays in this
field.