User Manual

Graphics Builder
Overview
5
64 | 196
A6V11604297_en--_e
Configuring the binding options
1. In the Plant view, display the graphic that will use Relative by navName binding.
2. Select > > Configure graphics > .
 Graphics Builder opens the graphic in a new tab.
3. Do the following for each component and smart label in the graphic:
– Select the item, right-click and select TOOLS > RELATIVIZE.
 The Component binding options dialog box displays.
– In the Top Equip section, select a location in the building hierarchy where the graphic will be used.
 By default, the object on which you opened this graphic for editing is selected. Another object can be
manually selected, if necessary.
 The Top Equip is used as the root when describing the relative location of the point within the hierarchy.
 This specific Top Equip will be replaced with the variable $id in the generated binding query. The $id
variable allows the binding to work when the graphic is opened from any other place in the hierarchy that
has the same structure.
– Select the Relative: By navName radio button and click APPLY.
Verifying the object binding
Complete this procedure for each component and smart label in the graphic.
1. Select a component or smart label, right-click and select TOOLS > VIEW BINDINGS.
Data point binding [➙ 58]
2. Verify that the data point binding is a relative reference. For example:
(point or shadowPoint) and navName=="Setpoint for cooling" is a relative binding.
baUniqueId=="9a0cffe8a0088543bfe4734dd93630bff4302fa7" is an absolute binding.
3. Modify the binding directly in the View bindings dialog box, if necessary.
4. When you are finished, click to save your changes and SAVE to confirm the file name and location