User Manual

Graphics Builder
Overview
5
A6V11604297_en--_e
59 | 196
Relative by navName binding
Relative by navName binding has a query that contains an equipRef and a navName. For example:
equipRef==$id
and
(point or shadowPoint) and navName=="Outside air temperature"
Figure 5: Example of navName in a binding query.
● The binding query works on any equipment where the structure of the building hierarchy and the navName
naming convention are a match.
● If the graphic is loaded on other equipment, the binding query looks for a data point at the same relative
position in the building hierarchy and with the same navName, and loads the information for the data point it
dynamically identifies.
● Recommended use: BACnet/IP systems where the application engineering reliably adheres to a well-known
naming convention.