User Manual

Graphic features

Kiosk graphics

44 | 196

A6V11604297_en--_e

①

Interactive kiosk

Only one graphic can be assigned to an interactive kiosk. This graphic displays when a user navigates to the kiosk.

Navigating to the kiosk and navigating to the graphic assigned to the kiosk appear the same to the user; however It is only

possible to enter or exit full-screen mode from the kiosk.

②

Starting graphic

If graphics with hyperlinks are used, a starting graphic should be assigned to the kiosk to optimize user experience. The starting

graphic should clearly indicate how to initiate or return to room operation and must provide a hyperlink to the main graphic used

in room operation.

③

Hyperlink to plant or room operation

Create a hyperlink from the starting graphic to the main graphic for room operation. Tap this hyperlink to begin room operation.

④

Navigation in full-screen mode

Create hyperlinks between the graphics used in room operation. Full-screen mode is automatically maintained when navigating

away from the kiosk and between various graphics during room operation.

⑤

Hyperlink to the kiosk

● Create a hyperlink to the kiosk in at least one graphic that is always accessible in room operation.

● Hyperlinks from all room operation graphics to the kiosk are recommended, but not required.

⑥

Exit sequence

An engineer can only exit full-screen mode by hyperlinking to the kiosk and executing the exit touch sequence. Hyperlinking to

the graphic assigned to the kiosk does not support the kiosk exit sequence.