User Manual

Graphics engineering
Dashboards
6
170 | 196
A6V11604297_en--_e
6.4.7.3 Changing the data source
This procedure modifies the data source for a gauge.
 This procedure uses the EQUIPMENTS and LAYERS panes.
1. Open the graphic for editing and click in the LAYERS pane to display the layer with the gauge.
2. In the EQUIPMENTS pane, navigate to the Present value data point that is the source for the
gauge.
3. Drag-and-drop the Present value point onto the gauge.
Note: Do not select the name of the Equipment.
4. Click and SAVE to save the graphic.
 The data source for the gauge has been updated.