User Manual

Graphics engineering
Dashboards
6
A6V11604297_en--_e
169 | 196
6.4.7.2 Adding a gauge
1. Open the graphic for editing and display the COMPONENTS and EQUIPMENTS panes.
2. From the COMPONENTS pane, drag-and-drop a Gauge onto the work area.
3. In the EQUIPMENTS pane, navigate to the Present value data point that is the source for the
gauge.
4. Drag-and-drop the Present value point onto the gauge.
5. Click and SAVE to save the graphic.
 The gauge has been added to the graphic.