User Manual

Graphics engineering
Dashboards
6
164 | 196
A6V11604297_en--_e
6.4.5.1 Changing the refresh interval for a trended data point
By default, data linked to the Energy and Water layers of the Public dashboard is refreshed every three hours.
To use a different refresh interval, edit the Delay property of the Timer control for the layer.
Changing the refresh interval
 This procedure uses the PROPERTIES and LAYERS panes.
1. Open the Sample dashboard public graphic for editing.
2. Click in the LAYERS pane to display the layer to edit. For example, hide the Weather layer and
display the Energy layer.
3. Expand the layer you are editing and select the Timer.
 The Delay property in the BASIC PROPERTIES displays the number of milliseconds between each
refresh of data in the graphic.
4. Change the Delay field to the desired refresh interval.
5. When you’re done editing, click to return the Weather layer to the default view.
6. Click and SAVE to save the graphic.
 The refresh interval for the trend data has been updated.