User Manual

Commissioning
Setup wizard
2
14 | 196
A6V11604297_en--_e
Network settings fields
Figure 2: Commissioning wizard, Network settings.
Setting
Description
DHCP check box
Select to use dynamic IP addressing. Otherwise, complete the IP address, Subnet mask and
Router fields to use a fixed IP address.
MAC Address
(Information only) MAC address of the device.
SNMP check box
If selected, SNMP monitoring is active.
Read community string
Community string that allows reading information from a device.
Port
(Information only) Port defined for IP communication.
Enable
(Information only) Online status of the IP communication port.
Network number
Number that identifies the IP network. Range is 0 to 65534. Default: 0
UDP port
UDP port number that the service uses to communicate. Range is 0 to 65535. Default: 47808
(BAC0)
Status
(Information only)
Table 2: Network settings fields.