User Manual

Graphics Builder
Pane tools
5
A6V11604297_en--_e
135 | 196
Removing read-only status from a smart label
1. Select the smart label and display the ADVANCED PROPERTIES.
2. Find the readOnly property, click and select REMOVE.
3. Click and then to display the updated smart label.
 The smart label now has command access.
Binding data points to a graphic component
To bind data points to a graphic component, drag-and-drop the data point from the VIRTUAL POINTS pane
onto the graphic component.
Figure 34: Binding a data point to a graphic component.