User Manual

Commissioning
Setup wizard
2
A6V11604297_en--_e
13 | 196
2.3 Setup wizard
The Setup wizard displays when you log in to any Desigo Control Point device with the status Unconfigured or
Download Required.
The Desigo Control Point device restarts at the end of this procedure to save your
configuration settings in non-volatile memory.
Using the Setup wizard
1. Use the tables in this section to complete the Setup wizard.
2. At the final pane of the Setup wizard, click Save to complete the commissioning.
 The device restarts and the login screen displays. The device is now available on the network.
Device fields
Figure 1: Commissioning wizard, Device fields.
Setting
Description
Device name
(Required) Name of the Desigo Control Point device. This name displays in the status bar.
Device instance number
(Required) A unique number in the range from 0 through 4194302. The number must not be used
by any other device on the BACnet network.
Description
Text field to describe the device. This description displays in the work area.
Location
Text field to describe the device location.
Time zone
Drop-down list of global time zones.
Model name
(Information only) Model number of the Desigo Control Point device.
Operation URL
(Information only) IP address of the Desigo Control Point device.
Firmware revision
(Information only) Current firmware revision loaded in the device.
Serial number
(Information only) Serial number of the Desigo Control Point device.
Local date
(Information only) Current date.
Local time
(Information only) Current time.
Table 1: Device fields.