User Manual

Reports
User interface
8
56
| 64 A6V11211557_en--_f
8 Reports
The Reports core function is only available on selected Desigo Control Point devices.
The Reports core function displays a point log report that can be filtered by device or object type. Users with
the appropriate access can also send archived reports to email recipients or an FTP server and purge archived
reports.
The point log report only displays data from integrated data points. In order to maximize the number of devices
that can be monitored, Event Enrollment objects are not integrated to Desigo Control Point. Therefore, the point
log report does not display any data for Event Enrollment objects.
This section discusses the following topics:
● Displaying a Point Log report, applying filters to limit the data displayed and searching for specific text in the
object properties.
User interface [➙ 56]
● Use the Reports tools (for users with the appropriate access):
– Emailing archived reports [➙ 58]
– Sending archived reports to an FTP server [➙ 58]
– Purging archived reports [➙ 58]
8.1 User interface
①
Devices
All devices that are currently being monitored by the Desigo Control Point device.
Default: All devices are selected.
②
Object type
All object types that can currently be accessed through the Desigo Control Point device.
Default: All object types are selected.
③
Status filters
The current status of the object.
● If an object is in two states at the same time, both states are displayed separated by a comma,
such as
Normal, Un-acked.
● If no status filters are selected, all status states are displayed including
Normal
.
Default: No filters are selected.
④
Apply button
Click to apply the selected filters and display the report results.