User Manual

List view
User interface
6
40
| 64 A6V11211557_en--_f
①
Object type
Icons represent the type of BACnet objects associated with a building, floor, room, or mechanical
equipment.
Icons [➙ 13]
②
Object display text
Identifies the control data point. If a
Description
has been entered for the object, the description is
displayed with the
Object name
below it. If the
Description
field is blank, only the
Object name
displays.
③
Value quality
Indicates if an object is in
Fault
or in
Transition
to a new value. For example, the value quality for a
Blind object is
Transition
while the blinds are in the process of raising or lowering.
State indicators [➙ 14]
④
Operating mode
Indicates if an object is
Overridden
or placed
Out of service
.
State indicators [➙ 14]
⑤
Trend data collection indicator
Indicates if a trend collection is defined for the object and whether the data is being collected
online
through Desigo Control Point or
offline
by an end device. Collected data is displayed in the
Trends
core function.
Trends [➙ 43]
⑥
Present value
Present value of the data point.
⑦
Alarm state indicator
State indicators [➙ 14]
⑧
displays if an object can be commanded to a new value, placed
Out-of-Service
, returned to
In
Service
, or released from
Manual
control.
⑨
Additional navigation through the building structure
Click to navigate to data points that are lower in the building structure.
⑩
Data point list
Data points located at the currently selected level of the building structure.
Display of structured objects
As shown in the following figure, structured objects, such as blinds, are displayed as separate objects with an
individual
Value quality, Operating mode, and Alarm state for each component of the structured object.
Figure 8: Example display of a structured object.