User Manual

Scheduler
User interface
5
A6V11211557_en
--_f 31 | 64
5.1.2 Modifying a schedule
This section outlines the following procedures for modifying a schedule:
● Adding a switching point
● Modifying the time of a switching point
● Using the expanded modification controls
– Modifying the time
– Deleting a switching point
– Changing the current value or setting
– Returning the object to the Schedule default
Adding a switching point
Use this procedure to add a new change of value or setting to the schedule.
1. Long press on the day and time where the switching point is needed.
 A new switching point displays.
2. (Optional) Use the up-and-down arrows to adjust the time in one-minute increments.
3. Tap Save to save the new switching point to the database.
Note
Tapping
Cancel discards all changes made since the schedule was last saved.
Modifying only the time of a switching point
Use this procedure to change the time of a switching point.
1. Drag the switching point to the desired time. Use the up-and-down arrows to adjust the time in one-minute
increments.
 The time adjustment controls automatically close after five seconds of inactivity.
2. Tap Save to save the new switching point time.
Note
Tapping
Cancel discards all changes made since the schedule was last saved.