User Manual

Plant view
User interface
3
A6V11211557_en
--_f 19 | 64
③
Additional object properties
Click the icon for the object (ⓐ), for example , to display additional object properties (ⓑ) that are
used for engineering graphics.
④
Graphics list
Displays graphics and kiosks that can be viewed.
A generic logo displays if a thumbnail image has not
been assigned to the graphic or kiosk.
Click the thumbnail image or generic logo to display a graphic or kiosk.
Sample graphic user interface
The following figure shows the Siemens sample graphic for controlling a room.
①
Object label
A label displays for each object in the graphic. Select the label to open the
Commander
dialog box for
the object.
Icons at the top of the label indicate:
● The type of BACnet object represented.
● Value quality – indicates if an object is in
Fault
or in
Transition
to a new value.
● Operating mode – indicates if an object is
Overridden
or placed
Out of service
.
● Trend data collection status.
● Alarm state.
The present value of the data point displays at the bottom of the label.
②
Additional object properties
Select the object icon, for example , to display additional object properties that are used for
engineering graphics.
③
Status icon
Icons help you to quickly evaluate the operating status of an environment. For example, the operating
mode for this room may display as
Protection
,
Economy
,
Pre-comfort
or
Comfort
.
④
Link to related graphic
Links to other graphics may be available to display related sections of the building structure.