Assortment / System Description
Table Of Contents
- Table of Contents
- 1 Desigo PXC Controllers – The flexible, reliable ...
- 2 ... and scalable automation and control system
- 3 Desigo Control Point ...
- 4 ... Embedded building operations
- 5 ... Portfolio
- 6 Operation and monitoring
- 7 A family of programmable automation stations
- 8 PXC4 automation stations
- 9 PXC5 system controllers
- 10 PXC7 automation stations
- 11 TXM input/output modules for PXC7 and PXC4
- 12 ABT Site ... for flexible and intuitive…
- 13 ... set-up, programming, and commissioning
- 14 Can be extended in stages at any time
9 PXC5 system controllers
Freely programmable system controller that integrate Modbus and/or MS/TP
devices or subsystems.
● BTL tested BACnet communication on IP (BACnet/IP and BACnet/SC) or
BACnet MS/TP, in compliance with the BACnet standard including B-BC profile
(Rev. 1.15)
● Modbus TCP / RTU and BACnet MS/TP
● IT security including HTTPS and BACnet/SC (as BACnet/SC hub)
● WLAN interface for engineering and commissioning
● System functions such as alarming, schedulers, trending, time sync, and life
check
● Grouping functionality e.g. common setpoints for room controls or energy
demand
● System and supervisory functionality
● Integration of Modbus subsystems and devices via TCP and/or RTU: Data point
mapping to BACnet/IP and supervisory functionality
● Integration of BACnet MS/TP subsystems and devices: Supervisory functionality
and routing to BACnet/IP
Function PXC5.E003
Number of configurable RS485 interfaces for Modbus or BACnet
MS/TP integration in field level networks
2
Number of Modbus data points via RTU and / or TCP 500
Number of MS/TP devices
(basic principle: 60 devices per trunk)
2 x 60
1)
Number of connected BACnet/SC nodes 100
1)
Depending on the behavior of the third-party MS/TP devices
For more information about PXC5 system controllers, refer to the data sheet
A6V11646020.
PXC5 system controllers
9
14 | 20 A6V13054432_en--_a