User Manual

EPD - Type II
Based on ISO 14021
PXC4.E16 Automation station
PXC4.M16 Automation station
Product line, product ran
ge
Siemens Schweiz AG
Building Technologies Division
Theilerstrasse 1a
CH-6300 Zug
Management System since by
ISO 9001 (Quality) 22.07.1986 SQS
ISO 14001 (Environment) 20.10.1998 SQS
OHSAS 18001 (OH&S) 01.01.2011 SQS
Typical energy consumption variant *) see below
Maintenance
Fire protection according to
Fire load variant *) see below
20-PAP Corrugated fibreboard Folded bottom box 69g
22-PAP Paper Packaging label 1g
Notes on disposal
Total weight of device variant *) see below
The total wei
g
ht of a device ma
y
deviate from the total of the wei
g
hts of all individual com
p
onents due to roundin
g
.
PC Upper housing variant
PBT+PP Siemens logo 1g
PC Button 1g
PC Light guide 4g
PC Lower housing 80g
PC Slider (3 pieces) 6g
PC Cap protector island bus 1g
Steel stainless Wire spring (3 pieces) 1g
PA/CuZn/Fe Terminal block 2 pole (1 piece) 4g
PA/CuZn/Fe Terminal block 3 pole (6 pieces) variant
PA/CuZn/Fe Terminal block 3 pole (7 pieces) variant
PA/CuZn/Fe Terminal block 11 pole (2 pieces) 38g
FR4; TBBA; solder SnAgCu Main-Board PCBA variant
FR4; TBBA; solder SnAgCu Processor-Board PCBA 9g
Others
PCBAs (Printed Circuit Board
assembled)
Materials
Packaging
Environmentally compatible
product design
Process control
Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes
the environmental impact of its products with respect to production, procurement, sales, use, services and disposal
during the product and process planning phases by complying with Siemens EP Standard (former SN 36350)
"Specifications on Environmentally Compatible Product and System Design".
Metals
Product use
Plastics
Risk of fire
Type label: PXC4.E16 33 VA, PXC4.M16 31 VA
Product
Desigo
One-way, recyclable
Environmental
Product Declaration
Type of equipment / Product No.
Not necessary
EN60730; UL916
A5W00061374-A
22.05.2019
Page 1/2
A6V11646055
_en--_a