Environmental Declaration

Building Automation
HVAC Products
Legal disclaimer: This declaration is for information purposes only.
The above information may be inaccurate or incomplete. Siemens Building Technologies Ltd. therefore does
not assume liability for any error or any consequences which may arise from the use of this information to the
maximum extent under the law.
If you require further information on environmental aspects and disposal, contact your local Siemens branch office.
Siemens Building Technologies CA1E9211en2
26.04.02 page 2 of 2
Materials
total weight of device (*)
1,570 g
Plastics PC GF10, halogen-free, 10% fiberglass covering (in cover)
45 g
POM, halogen-free, fiberglass-free slider
6g
PC, halogen-free, fiberglass-free 11 light guides in covering (*)
4g
Metals Sheet steel, zinc-plated housing base
480 g
Sheet steel, powder coated cover
420 g
Steel, tempered, zinc-plated, chromated
blue
4TORXscrews
2g
Circuit board with
components
FR4, containing halogens, SnPb solder master circuit board
413 g
FR4, containing halogens, SnPb solder panel circuit board (*)
55 g
Special components
Li-MnO
2
battery on master circuit board (8 g)
Electrolytic capacitors >4cm
3
3 pcs. on master circuit board (6 g)
Relays, AgSnO
2
contacts 6 pcs. on master circuit board (48 g)
Plug connector, PA66/PBT, bronze
on master circuit board, 91
pole
(38 g)
Socket connector, PA66/PBT, bronze plugged into plug connector
145 g
Disposal
Do not dispose of the device as part of standard household garbage, but as
special waste from electrical and electronic components. This particularly applies
to electronic circuit boards.
Additionally, the law may mandate special treatment for specific components or
special treatment may be ecologically sensible.
Observe all local and applicable laws.
Notes
Materials and special components:
(*) Data for PXC36-SS;
PXC36: without panel circuit board and only 5 instead of 11 fiber optic lines
à Total weight of the device:
1513 g
Environmental benefits
• Universal, flexible programming with specific HVAC functions allows the optimization of building
services, thereby reducing consumption of primary energy and thus the emission of CO
2
,NO
x
,SO
2
,etc.
• Minimum fire load because of steel sheet housing.