Operating Instructions
Table Of Contents
- Cyber security disclaimer
- How to Use This Manual
- Chapter 1—Introduction
- Chapter 2—Hardware Features
- 16- and 24-Point Compact Series Diagram
- 36-Point Compact Series Product Diagram
- Supported Point Types
- Compact Series Backup Batteries
- Memory
- Communication Connections
- Compact Series Specifications
- BACnet Compact Series Specifications
- Compact Series Smoke Control Application Requirements
- HOA (Hand-Off-Auto) Upgrade Kits
- PXC Compact on P1
- PXM10S/T Product Overview and Description
- Unitary Equipment Controller
- TX-I/O Product Range Overview
- PX Series Enclosures and Service Boxes
- Chapter 3—Applications
- Chapter 4—Troubleshooting
- Glossary
- Index
Chapter 2—Hardware Features
PXC Compact on P1
0
68
| 118
Siemens Industry, Inc.
Owner's Manual
553-104
Building Technologies
2018-10-01
Menu/Submenu
Step
Description
Main Rotate
DIAL
to highlight
Logoff
.
Press
DIAL
/
OK
to and select
Logoff
.
Displays the Logoff submenu.
Confirm Logoff
Are you sure?
Rotate
DIAL
to highlight
Yes
or
No
.
Press
DIAL
/
OK
to make
selection.
Confirms logoff and returns to splash screen.
NOTE:
If you press
ESC
, you are prompted with the same
Confirm Logoff screen.
Figure 14: Confirm Logoff Submenu
Viewing and Acknowledging Alarms
Viewing Alarms
The Alarm button is translucent and has a red LED which lights up and flashes in
response to incoming alarms. Anyone can view unacknowledged alarms, even if they
are not logged in, by pressing the
Alarm button.
Do the following to view all alarms.
Figure 15: Alarms menu
Figure 16: Alarms All Submenu