Operating Instructions
Table Of Contents
- Cyber security disclaimer
- How to Use This Manual
- Chapter 1—Introduction
- Chapter 2—Hardware Features
- 16- and 24-Point Compact Series Diagram
- 36-Point Compact Series Product Diagram
- Supported Point Types
- Compact Series Backup Batteries
- Memory
- Communication Connections
- Compact Series Specifications
- BACnet Compact Series Specifications
- Compact Series Smoke Control Application Requirements
- HOA (Hand-Off-Auto) Upgrade Kits
- PXC Compact on P1
- PXM10S/T Product Overview and Description
- Unitary Equipment Controller
- TX-I/O Product Range Overview
- PX Series Enclosures and Service Boxes
- Chapter 3—Applications
- Chapter 4—Troubleshooting
- Glossary
- Index
Chapter 2—Hardware Features
PX Series Enclosures and Service Boxes
0
96
| 118
Siemens Industry, Inc.
Owner's Manual
553-104
Building Technologies
2018-10-01
● Space between door panel and opening obstruction must be at least 11 inches
(279.4 mm) to allow for door removal at 40 degrees, or 28 inches (711 mm) with a
cabinet mounting at least 19 inches (483 mm) from the left side wall to allow door
to completely open at 135 degrees.
● 5 inches (127 mm) minimum horizontal distance between the enclosure and any
obstruction to the left and right.
● 7 inches (178 mm) minimum depth out from the wall on the left (hinged) side for
door clearance.