Operating Instructions
Table Of Contents
- Cyber security disclaimer
- How to Use This Manual
- Chapter 1—Introduction
- Chapter 2—Hardware Features
- 16- and 24-Point Compact Series Diagram
- 36-Point Compact Series Product Diagram
- Supported Point Types
- Compact Series Backup Batteries
- Memory
- Communication Connections
- Compact Series Specifications
- BACnet Compact Series Specifications
- Compact Series Smoke Control Application Requirements
- HOA (Hand-Off-Auto) Upgrade Kits
- PXC Compact on P1
- PXM10S/T Product Overview and Description
- Unitary Equipment Controller
- TX-I/O Product Range Overview
- PX Series Enclosures and Service Boxes
- Chapter 3—Applications
- Chapter 4—Troubleshooting
- Glossary
- Index
Glossary
114
| 118
Siemens Industry, Inc.
Owner's Manual
553-104
Building Technologies
2018-10-01
Transmission Control Protocol/Internet Protocol (TCP/IP): Protocol suite developed by
the U.S. Department of Defense to link dissimilar computers across different kinds of
networks. TCP/IP is the transport protocol employed by the Internet and is commonly
used on Ethernet networks.
U
unbundle: Describes the action of entering a point that resides in an equipment
controller's database into the field panel's database so that it can be monitored and
controlled from the field panel.
Unicast: Destination IP address that represents a single interface to a single system. IP
datagrams sent to a unicast address are sent to a single interface on a single IP host.
User Datagram Protocol (UDP): TCP/IP protocol that provides simple datagram
services. UDP is a connection-less mode protocol that is layered on top of IP. UDP
does not guarantee delivery and is not used for applications that require
acknowledgements or re-transmission.
V
Virtual AEM: Without additional hardware, the Virtual AEM connects an RS-485
APOGEE Automation Level Network or individual field panels to a P2 Ethernet
network. (Additional license required.)