Operating Instructions
Table Of Contents
- Cyber security disclaimer
- How to Use This Manual
- Chapter 1—Introduction
- Chapter 2—Hardware Features
- 16- and 24-Point Compact Series Diagram
- 36-Point Compact Series Product Diagram
- Supported Point Types
- Compact Series Backup Batteries
- Memory
- Communication Connections
- Compact Series Specifications
- BACnet Compact Series Specifications
- Compact Series Smoke Control Application Requirements
- HOA (Hand-Off-Auto) Upgrade Kits
- PXC Compact on P1
- PXM10S/T Product Overview and Description
- Unitary Equipment Controller
- TX-I/O Product Range Overview
- PX Series Enclosures and Service Boxes
- Chapter 3—Applications
- Chapter 4—Troubleshooting
- Glossary
- Index
Chapter 2—Hardware Features
PXC Compact on P1
0
73 |
118
Siemens Industry, Inc.
Owner's Manual
553-104
Building Technologies
2018-10-01
Figure 23: Edit Command Point Value Submenu
Releasing Points
Do the following to change a point priority and release a point.
Figure 24: Point Action Release Priority Submenu
Menu/Submenu
Step
Description
Main Rotate
DIAL
to highlight
Points
.
Press
DIAL
/
OK
to select
Points
.
Displays the Points menu.
Points
Rotate
DIAL
to highlight
desired point.
Press
DIAL
/
OK
to select point. Displays the Point Action Release Priority submenu.
BACnet Point Action
Rotate
DIAL
to highlight
Release Priority
.
Press
DIAL
/
OK
to select
Release Priority
.
NOTE:
BACnet point priorities cannot be commanded lower
than a priority value of 8.
Rotate
DIAL
to change the
numeric value of the point
priority.
Press
DIAL
/
OK
to edit point
priority.
Rotate
DIAL
to change point
priority value.
Press
DIAL
/
OK
to confirm
change.
Releases BACnet point priority.
Press
ESC
.
Returns you to the previous menu without changing the
point priority.