Operating Instructions
Table Of Contents
- Cyber security disclaimer
- How to Use This Manual
- Chapter 1—Introduction
- Chapter 2—Hardware Features
- 16- and 24-Point Compact Series Diagram
- 36-Point Compact Series Product Diagram
- Supported Point Types
- Compact Series Backup Batteries
- Memory
- Communication Connections
- Compact Series Specifications
- BACnet Compact Series Specifications
- Compact Series Smoke Control Application Requirements
- HOA (Hand-Off-Auto) Upgrade Kits
- PXC Compact on P1
- PXM10S/T Product Overview and Description
- Unitary Equipment Controller
- TX-I/O Product Range Overview
- PX Series Enclosures and Service Boxes
- Chapter 3—Applications
- Chapter 4—Troubleshooting
- Glossary
- Index
Chapter 2—Hardware Features
PXC Compact on P1
0
69 |
118
Siemens Industry, Inc.
Owner's Manual
553-104
Building Technologies
2018-10-01
Menu/Submenu
Step
Description
Main
Rotate
DIAL
to highlight
Alarms
.
Press
DIAL
/
OK
to select
Alarms
.
Displays the Alarms menu.
Alarms
Press
DIAL
/
OK
to select
All
Alarms
.
Displays a list of unacknowledged alarms and alarms that
have been acknowledged, but not yet reset.
Proprietary version also displays “Failures” submenu.
Rotate
DIAL
to highlight a point
in alarm.
Press
DIAL
/
OK
to accept
selection.
Alarm window displays if an alarm needs to be
acknowledged.
Press
INFO
to view details of
alarm condition.
NOTE:
A point must be highlighted to view alarm details.
Alarm details include point value and point status.
Press
ESC
. Returns you to the Alarms menu.
Figure 17: Point INFO details
Acknowledging Alarms
You must have sufficient access privileges (at least Command level access) to
acknowledge alarms. When acknowledging, the point name is displayed as the title on
the screen.
You can either press the Alarm button or go through the Alarm menu to view and
acknowledge alarms. If you are not logged in, you can only view alarms.
Do the following to acknowledge points in alarm.
Figure 18: Alarms Menu
Figure 19: Unacked Alarms submenu