Operating Instructions

How to Use This Manual
9 |
118
Siemens Industry, Inc.
Owner's Manual
553-104
Building Technologies
2018-10-01
How to Use This Manual
About This Manual
This manual is written for the owner and user of the PXC Compact Series. It is
designed to help you become familiar with the PXC Compact and its applications.
This section covers manual organization, document conventions and symbols used in
the manual, how to access help, related publications, and any other information that
will help you use this manual.
Document Organization
This manual contains the following chapters:
●
Chapter 1—Introduction , describes each section in this manual and presents an
overview of PXC Compact operation.
●
Chapter 2—Hardware Features , describes the PXC Compact hardware
components and their functions.
●
Chapter 3—Applications , describes the operating system and applications
available with the PXC Compact.
●
Chapter 4—Troubleshooting , describes basic corrective measures you should take
if you encounter a problem when using a PXC Compact.
NOTE:
The troubleshooting section is not meant to be a full diagnostic guide, but is designed
to help you address basic troubleshooting issues. If you encounter a problem not
covered in this section or require further assistance, consult your Siemens Industry
representative.
● A Glossary describes the terms and acronyms used in this manual.
● An
Index is provided to assist you in finding information presented in this manual.
Prerequisites
In addition to reading this owner's manual, you should also become familiar with the
following technical documentation. Each document has been written to help you get
the most out of your PXC Compact Series hardware.
These manuals, along with information about other Siemens Industry products,
technical training classes, and services can be obtained from your local Siemens
Industry representative.
●
Powers Process Control Language (PPCL) User's Manual (125-1896). This manual
describes Powers Process Control Language (PPCL), the language used to write
the control programs for the PXC Compact.
● APOGEE P2 ALN Field Panel User's Manual (125-3019) or the APOGEE BACnet
ALN Field Panel User's Manual (125-3020). These manuals describe the operator
interface program used to communicate with APOGEE field panels. It contains
information on defining the PXC Compact database, including slopes and
intercepts.