Installation Instructions

Installation Instructions
Document No. 565-1005
March 3, 2014
Siemens MXL Driver for PXC Modular and PXC-36
Siemens Industry, Inc.
Page 1 of 3
These installation instructions cover the connection of
the Siemens MXL Driver to the Siemens MXL fire
alarm system only.
 For hardware installation of the PXC Modular, see
the
PXC Modular Series Installation Instructions
(553-638).
 For hardware installation of the PXC-36, see the
PXC Compact 36 Installation Instructions (553-
504).
NOTE:
The Siemens MXL and FireFinder XLS
Drivers on PXC Series use the same
underlying code for firmware and the
license. However, the start-up and
commissioning process for the
Siemens MXL and FireFinder XLS
Drivers is not the same. For
consistency, always use the MXL
license part number (LSM-INT-
SBTMXL) and the MXL documentation
for the Siemens MXL Driver.
Since the underlying code is the same,
the firmware and driver license do not
need to be updated if the MXL system
is migrated to XLS in the future.
Product Description
The Siemens MXL Driver enables communication
between the APOGEE® Automation System and the
Siemens system.
Product Numbers
License
LSM-INT-SBTMXL
License to enable the Siemens MXL
Driver on PXC Modular or PXC-36
hardware.
PXC Modular Series
PXC00-PE96.A
PXC Modular, Ethernet or RS-485
ALN, 96 FLN nodes
PXC00-E96.A
PXC Modular, BACnet/IP or MS/TP
ALN, 96 FLN nodes
PXC100-PE96.A
PXC Modular, Ethernet or RS-485
ALN, 96 FLN nodes, TX-I/O module
support
PXC100-E96.A
PXC Modular, BACnet/IP or MS/TP
ALN, 96 FLN nodes, TX-I/O module
support
PXX-485.3
Expansion Module, three RS-485 FLN
connections
PXC Compact Series
PXC36-PE.A
PXC Compact, 36 point, Ethernet/IP or
RS-485 ALN
PXC36-E.A
PXC Compact, 36 point, BACnet/IP or
MS/TP ALN
Caution Notation
CAUTION
Equipment damage or loss of data
may occur if you do not follow a
procedure as specified.