User Manual

3/4
Siemens Building Technologies Program cards CM2N8317E
Landis & Staefa Division 05.10.2000
Engineering notes
Note the following during engineering:
Use these cards only for applications as described in the brief description on the title
page (bold print) and the section "Use".
Create the plant operating program in accordance with the control and supervisory
requirements of the respective plant and by including all safety-related issues.
The PVA3.01/Vxx program card is used in the VISONIK BPS/NetBPS.
For standard DDC applications.
For plants with max. 80 MONOGYR devices (RCE81, SEZ81) and a heat, cooling or
air handling plant.
As a TEC master with max. 40 FLN devices (RCE91, 92, 93 and RWI).
The PVA3.02/Vxx program card is used in the VISONIK BPS/NetBPS.
For applications whose scope of functions is greater than the above.
When the operating dialog and the message buffer are to be installed and set up
respectively.
As a TEC master with max. 80 FLN devices (RCE91, 92, 93 and RWI).
The BPS1.M/E2-Vxx program card can be used only in the EcuBPS.
Mounting notes
The program cards are delivered with mounting instructions. These instructions show
where and how to insert the respective cards in the basic unit.
Do not touch electrical contacts or components on the open unit or card, as electro-
static discharges may destroy sensitive components!
When mounting, apply suitable safety measures such as using an earthed antistatic
mat connected to your wrist.
Commissioning notes
Insert a program card to commission the VISONIK BPS/NetBPS or EcuBPS.
Technical data
The following list contains the primary technical data for the program cards.
Memory for applications: conformity
PVA3.01/Vxx 140 KB (SRAM)
PVA3.02/Vxx , BPS1.M/E2-Vxx 640 KB (SRAM)
In accordance with the European Union directives on
electromagnetic compatibility 89/336/EEC
System software: Emissions EN 50 081-1
All types 2 MB (EPROM) Immunity EN 50 082-2
Weight without packaging 0.11 kg
The environmental conditions and all further general data of the basic units equally
apply; see data sheets N8305 or N8307.
STOP
Program card
selection
.
.
.
.
.
.
.
.
.
Note
.
.