Owner`s manual

58 ProLINE-RoadRunner Operator’s Guide A
Device Rotation
If devices rotate excessively on the
conveyor belt:
1. Press Pause. Wait for all de-
vices to get picked from the belt.
2. Press the Emergency Stop.
3. Remove the Dust Cover (some
models) and clean only the
exposed surface of the
conveyor belt with isopropyl
alcohol on a cloth, then dry it.
Rotate the belt by hand and
repeat until entire belt is clean.
4. To continue, replace the
Conveyor Dust Cover, and
release the Emergency Stop
button. Align the tape pockets
(Chapter 3), then press Start. 
Dry
3
Rotate & Repeat
3
3
Clean