Owner`s manual
57
ProLINE-RoadRunner Operator’s Guide A
If the tape jams, an error message
displays and the blue lamp
illuminates. To clear the tape path:
1. Press the Emergency Stop
button (to continue the job later)
or select Job, then End.
2. Turn the power Off.
3. Unroll one turn of cover tape
and cut it near the Take-Up Reel.
4. Cut the device tape where it
exits the conveyor end.
5. At the tape reel, pull the tape out
backwards until the end is free
from the tape path.
6. Trim away any flaws before
reloading.
3
3
Removing Jammed Device Tape
5