Owner`s manual

48 ProLINE-RoadRunner Operator’s Guide A
To restart a job after a Pause or an
Emergency Stop:
1. Rotate the Emergency Stop
button clockwise to release it, if
applicable.
2. Press Menu until the main level
menu is displayed
3. Select Align Pocket.
4. Press the Up Arrow to advance
the device tape until the next
pocket center hole lines up with
the alignment mark (± 3 mm).
5. Press Start.
The job will resume. 
1
Job
Advance Pocket
> Align Pocket
Purge
3
Restarting a Job
4
5