Owner`s manual

40 ProLINE-RoadRunner Operator’s Guide A
To run a job:
1. Insert a job card into the
PC-Card slot.
2. Clear the conveyor belt of any
unneeded devices.
NOTE: If the job card has
Supervisor authority, ensure the
correct job is selected. See
Supervisor Menu.
3. Press Start. The green lamp
will start blinking.
When the programmed devices
reach the assembly machine pick
point, the belt will pause and the
green lamp will stay lit without
blinking. 
Running a Job
3
> Job
Advance Pocket
Align Pocket
Purge
1