Owner`s manual

38 ProLINE-RoadRunner Operator’s Guide
5. Using the arrow buttons, toggle
Network to Card.
6. Press the Menu button to save
your changes.
7. Cycle the power Off and then
On.
NOTE: The network configuration
file is deleted from the PC-Card at
the end of the process. This
prevents accidentally configuring
two RoadRunners with the same
network settings.
8. Plug in a Network Cable,
10BaseT or 100BaseT. Only
FC III & later programmers
make use of the latter. 
5
5
• Network: Card
Status: Enabled
PGM: MyRR
IP 123.123.12.123
6
Network Connection, continued
8