Owner`s manual

36 ProLINE-RoadRunner Operator’s Guide
To align the tape pockets:
1. Select Align Pocket from the
Menu.
2. Press the Up Arrow to advance
the tape until the next tape
pocket center hole is approxi-
mately centered at the pick point
alignment mark. Do not advance
devices past the pick point. They
may jam the tape path.
3. Press Menu to end this pro-
cess.
NOTE: Perform this aligning
procedure each time power is
applied, including after releasing
the Emergency Stop. 
Aligning the Tape Pockets
1
Job
Advance Pocket
> Align Pocket
Purge
2
2