Owner`s manual

32 ProLINE-RoadRunner Operator’s Guide
If you have an Adjustable Tape-In
Module, you may need to adjust it to
match your tape width.
Adjustable Tape-In Module only—
If the etched number on the
three-position spacer does not
match your tape width dimension
(mm) then adjust it:
1. With the power off (0), push the
PNP head out of the way.
2. Loosen the Position Locking
Screw most of the way out
using a 4 mm Allen wrench.
Adjusting the Tape-In Module
Non-Adjustable
Adjustable
2
Current
Setting