Owner`s manual

16 ProLINE-RoadRunner Operator’s Guide A
1
To mount RoadRunner (with Feeder
Bank Adapter attached) onto a
SIPLACE X Assembly Machine:
NOTE: To attach the Adapter,
contact Data I/O Support.
1. Holding RoadRunner level, align
the grooves on the Adapter with
ribs on the Feeder Bank, and
slide RoadRunner as far forward
as it will go.
Mounting on the Assembly Machine
1
Heavy; 19 kg (41 lbs). Do Not Drop.
Mount Only With Approved Hardware.
Warning:
FEEDER CARTS CAN TIP: Remove RoadRunner
from the Feeder Cart before pulling the cart away
from the SMT machine.
Warning: