User Manual

Timeswitch Catalogue 82
---------------------------------------------------------------
5.7.9 BPS: Change defaults
Only one use of a single default value per parameter is
possible (for WDC and EXC).
To change this value, proceed as follows:
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;
"Timeswitch Catalogue ..." window : :
Select "Functions" : :
Select "Configuration" : :
➡ "Configuration" window : :
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<
You can find a more detailed description of this window
under "The 'Timeswitch Catalogue... window.'"
The following entries are allowed for default values:
- a numerical value
- DFV
- PDFV
- ADFV
- RDFV
- ZDFV
- VDFV
- . ("Don't care")
You can find more information in the " Operation
Handbook BPS".
5.7.10 BPS: Entering times and values
You cannot make any new entries in the "Time" layout;
only editing of existing entries is possible.
There are two possibilities available for editing cell pairs:
- Enter times (start and stop) and values. This option is
especially needed for the input of new entries.
- Only modify the time.
The times and values option does not function if, for the
same day, simultaneously more that one cell pair is
selected.
---------------------------------------------------------------
CM2B8523E UNIGYR VISONIK Insight March 1995