User Manual

Timeswitch Catalogue 74
---------------------------------------------------------------
Conflicting entries:
If there are conflicting entries in the WDC, a window ap-
pears with the information: (Example)
"WDC: $030
Conflict in line 60. Correct with the
System Editor."
After confirmation, an OS/2 System Editor window opens
automatically.
Title bar (example):
"E.EXE - tscdat\2.tsc"
The conflicting lines are identified by a question mark on
the left hand side. Correct the conflict in the file, delete the
question mark, and then proceed as follows:
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;
: :
"E.EXE - tscdat\2.tsc" window
: :
Select "File"
: :
Select "Save"
: :
➡ Information window "Save under ..." : :
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<
[Type...]
Select "Text File" in the selection window which now ap-
pears, then
[Set]
Close the "E.EXE - tmpdat\2.tsc" window and call up
"WDC" again.
At this point at the latest, the window mentioned further
above appears.
The changes are inserted into the graph only after a
change of destination.
5.7.2 Exiting from WDC
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;
: :
"WDC:DST..." window
: :
<F3> or
: :
Select "Command"
: :
Select "Exit" : :
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<
On exiting, all the changes made in the WDC are in-
serted into the graphic layout of the catalogue entries.
---------------------------------------------------------------
CM2B8523E UNIGYR VISONIK Insight March 1995