User Manual

ManualsBrandsSiemens ManualsBuilding automationOperating Handbook INSIGHT V4.60

Timeswitch Catalogue 73

---------------------------------------------------------------

Entry: Enter here the desired lengthening or shorting of the

operating time in hours and minutes.

"Active" or "inactive" determines whether the change

should be taken into account for the current editing of this

entry or for the one following.

IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;

Printing the window:

: :

"Timeswitch Catalogue ..." window

: :

Select "Command"

: :

Select "Print"

: :

HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<

Selecting the The function "Timeswitch Catalogue" permits only the

catalogue: WDC and the OVC or EXC catalogues to be edited. The

SDC catalogue can only be viewed.

IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;

: :

"Timeswitch Catalogue ..." window

: :

Mark desired destination

: :

[WDC], [OVC/EXC] [SDC] or

: :

Select "Function"

: :

Select "WDC," "OVC/EXC" or "SDC"

: :

➡ Corresponding window

: :

HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<

5.7 Weekday Catalogue (WDC)

---------------------------------------------------------------

Icon:

8522O39E

5.7.1 Calling up WDC

IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;

: :

"Timeswitch Catalogue ..." window

: :

Mark desired destination

: :

[WDC] or

: :

Select "Function"

: :

Select "WDC"

: :

➡ "WDC: DST...." window

: :

HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<

The description of this window follows below under "Types

of layout."

---------------------------------------------------------------

CM2B8523E UNIGYR VISONIK Insight March 1995