User Manual

Timeswitch Catalogue 71
---------------------------------------------------------------
8523OM4E
Address. The address of the destination and the associated
Parameter: parameters can be seen here.
Entry type: Select the type of destination here: the default is
"compressed"and is valid for operation with Popcards.
Parameters: If you have set the type "freely selectable," then you can
enter the desired parameters here.
Default value: Enter the default values here.
The following entries are allowable:
- a numerical value
- DFV
- PDFV
- ADFV
- RDFV
- ZDFV
- VDFV
- .("Don't care")
Cyclic output: Selecting this option causes a value output every minute.
Otherwise, the output occurs at the start or stop time
(switching indent function).
Destination active: This selects whether the destination should be taken into
account or not during the processing of the timeswitch
program.
---------------------------------------------------------------
CM2B8523E UNIGYR VISONIK Insight March 1995