User Manual

Timeswitch Catalogue 69
---------------------------------------------------------------
window.
Time-overlapping In the case of conflicting entries in OVC, EXC or WDC, the
entries: overlapping parts of the bars and the display of
"OVC/EXC" or "WDC" at the left hand edge of the graph
are shown in red.
To solve such conflicts, see under "WDC," "OVC" or
"EXC."
Zooming in/ With this function, the length of the time axis can be se-
zooming out: lected.
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;
: :
"Timeswitch Catalogue ..." window
: :
[ > < ] or [ < > ] or:
: :
Select "Function"
: :
Select "Zoom" or "Unzoom" : :
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<
Selecting another Select the desired destination in the selection list. The
destination: momentarily represented destination is displayed
inversely.
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;
Entering
: :
Timeswitch Catalogue ..." window
a new PRV1
: :
Select "Function"
destination:
: :
Select "New Destination ..."
: :
➡ "Enter Destination" window : :
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<
Enter technical address in the substation (user
addresses are not permitted); if necessary enter with
parameter and verify with [OK]:
"$030" for the TSP main parameter
"$030.HIL" for a parameter other than the TSP main
parameter.
After a new destination has been entered, the window for
the Weekday Catalogue opens automatically.
---------------------------------------------------------------
CM2B8523E UNIGYR VISONIK Insight March 1995