User Manual

Timeswitch Catalogue 67
---------------------------------------------------------------
Meaning of the two saving possibilities
"... to Server ..." and "... to SS ...":
"... to Server ...":
The catalogues are only copied to the allocated DCS file.
"... to SS ...":
The catalogues are first also copied to the allocated DCS
file. Transfer to the substation depends on the type of
connection:
SS in the ring: The catalogues are copied immediately to the substation.
SS via modem: The catalogues are copied to the substation with the next
connection setup.
5.5 Saving to a local drive
---------------------------------------------------------------
Saving to a local drive enables you to make backup copies
of the timeswitch programs of the substations, and to load
these if required.
IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;
: :
"Timeswitch Catalogue" window
: :
Select "Command"
: :
Select "Save to File ..."
: :
➡ "Save Timeswitch Catalogue to File" window : :
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<
Select drive, directory and file or enter file name, [OK]
The default is ...\UVI\TSCDAT\*.DAT
When starting the function "Save to File ...," only files with
the extension .DAT are displayed at first. A double click at
the drive will cause files with other extensions to be
displayed.
When loading a timeswitch program (substation or point
address), all destinations of a substation are saved when
making a local save, regardless of the address entry.
---------------------------------------------------------------
CM2B8523E UNIGYR VISONIK Insight March 1995