User Manual

Timeswitch Catalogue 64
---------------------------------------------------------------
Entry of a substation The timeswitch catalogue of all the destinations of the
address: substation in question is available for editing.
Entry of a point Only the timeswitch catalogue of the destinations of the
address: selected point are available for editing. Substation desti-
nations which are not required are filtered out.
Meaning of the two loading possibilities
"... from DCS" and "... from SS":
Downloading from the Weekday Catalogues (WDC) and Override Catalogues
DCS: (OVC) or Exception Catalogues (EXC) are taken from the
allocated DCS file of the selected substation and
transmitted to "Insight."
Downloading Weekday Catalogues (WDC) and Override Catalogues
from a SS: (OVC) or Exception Catalogues (EXC) are first copied
from the selected substation into the allocated DCS file,
and then transmitted to "Insight."
5.2 Creating a new catalogue
---------------------------------------------------------------
To create a timeswitch catalogue for a point or a substa-
tion for which there is not yet an entry, proceed as follows:
1. Load the appropriate (empty) catalogue
For further information see "Downloading a Catalogue
from a SS or DCS
2. Enter the necessary destination in the "Timeswitch
Catalogue ..." window.
For further information see "The Timeswitch
Catalogue..." window.
3. Make the necessary entries in the "Weekday
Catalogue" or the "Override/Exception Catalogue"
For further information see "PRV1: Enter times and
value"
"BPS: Enter times and value"
4. Save the Timeswitch Catalogue
For further information see "Saving to SS or DCS."
---------------------------------------------------------------
CM2B8523E UNIGYR VISONIK Insight March 1995