User Manual

Timeswitch Catalogue 63

---------------------------------------------------------------

5.1 Downloading a catalogue from an SS or a DCS

---------------------------------------------------------------

IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M;

: :

"Timeswitch Catalogue" window

: :

Select "Command"

: :

Select "Load from SS" or "Load from DCS"

: :

➡ "Load Timeswitch Catalogue from DCS/SS"

: :

window

: :

HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM M<

8522O35E

The same window appears for both commands.

Address Technical or user address of a substation, or a point, e.g.

"$12" or "$33'040"

System System name, e.g.:

MAN

(No entry must be made here for an in-house system.)

DCS or substation Regardless of the aforementioned command, there is once

more the possibility to decide whether the catalogue

should be downloaded from the DCS or from the substa-

tion.

Note the following when entering the address:

The whole timeswitch program is always loaded with all

the destinations of a substation. However, the display and

the possibility of editing depend on the entered address:

---------------------------------------------------------------

CM2B8523E UNIGYR VISONIK Insight March 1995